3M DI-NOC Films will make you rethink the possibilities of what film can do, with a variety of exquisite designs and patterns. It can be applied to glass, wood, stone, plastic and pretty much any textured surface. 3M DI-NOC is part of 3M’s architectural finishes series and is high quality vinyl alternative to carbon fiber. The applications are limitless and the benefits of using it are endless.

Two different 3M DI-NOC film wood patterns installed on office doors

3M DI-NOC is the ultimate alternative for carbon fiber and gives you that carbon fiber look and feel without the carbon fiber price. The three dimensional texture of DI-NOC allows it to reflect light much in the same way carbon fiber does. It is water resistant and extremely durable in hot and cold conditions. Recent 3M tests have shown that it can withstand heat and cold, standing up to temperatures ranging from 65 to -101 degrees Celsius for extended lengths of time without any visible degradation.

Different DI-NOC film patterns applied to kitchen cabinets and countertops

This film can be removed, though there is always the chance it might damage the sub-surface in the removal process. DI-NOC can be washed, preferably with a non abrasive soap water.

3M DI-NOC film dark wood pattern applied to column in the office

With all the different applications to this film it’s recommended to test it before you decide to use in a non-conventional way. With the popularity of this film there have been several knockoff products out there that are not nearly of the same quality as the 3M products and cost a lot less. So if you have someone offering you DI-NOC at what seems like too good to be true prices, chances are it is too good to be true.

For more information about our line of DI-NOC Films and all the different patterns available visit our website www.dinocfilm.ca or call 1-888-835-5885